HYPERSHINE SOFT

Hypershine testo EN
Hypershine foto principale
barra gialla
New and revolutionary diamond pads for floor polishing. Ideal for surfaces in natural stone, terrazzo, concrete, vinyl and epoxy.
Easy to use with any floor scrubbing machines. They remove scratches, even deep, clean and polish. They make your old floor look like new again!

Diamond particles impregnated pads
perform mechanical cleaning and polishing
of the floor in place of chemicals.

Hypershine 01
Hypershine 2

Available in all sizes and
grit from 60 to 10.000.

barra gialla

HYPERSHINE SOFT are easy to use. For all kind of floor surfaces with all type of cleaning and polishiang machines.
Dry or Wet use they give better performance and long life due to high content of diam particles.

Hypershine 3
HYPErshine soft EN
Hypershine 4 EN

Easy to use

Hypershine 5
The same routine operations but with better results.

Using HYPERSHINE pads is easy. Use them with all type of floor cleaning machines. Only need little water to achieve a perfect surface.

  • They are suitable for all types of machines and are available in different sizes.
  • Replaces chemicals and normal abrasive pads.
  • Effective and fast even on the most resistant dirt and difficult surfaces.

Ecofriendly

Hypershine 6
The work both wet or dry. Environmentally friendly system.

The respect of the environment is for everyone benefit. HYPERSHINE gives the best result without any chemicals.

  • Sustainable.
  • No chemicals.
  • No wax or polish.

Savings

Hypershine 7
Faster, easier and cheaper.

HYPERSHINE pads clean any floor in any condition. Save on chemical products achieving a hight gloss surface in a fast and easy way.

  • Cost effective.
  • Hypershine have long life.
  • No need far chemicals.
  • Time and cost reductions.

Superior results

Hypershine 8
Surprising results, superior brilliance every day.

With Hypershine you can turn an old floor into a new floor! Thanks to the diamond micro-particles the results are incredible! Removing scratches, cleaning and hight glossy polishing will be a breeze.

  • High brightness.
  • Maximum cleaning.
  • Scratches removal.
  • Easier and cheap maintenance.

HOW TO USE

barra gialla

Marble and Terrazzo

Hypershine 9

Polishing with HYPERSHINE and single disc machine.

Mirror polishing in just 3 STEPS

  • Start sanding with HYPERSHINE SOFT 1 or 2 depending on the condition of the floor, then proceed with HYPERSHINE SOFT 3.
  • We recommend that you work with little amount of water for about 60sec / sqm.
  • Polish with HYPERSHINE SOFT 4 using water.

Linoleum, PVC, Vinile

Hypershine 10

Floor restoration with high speed single disc machine.

Cleaning and Polish in only 3 STEPS

  • We recommend a high-speed machine.
  • Start by washing the floor with HYPERSHINE SOFT 1 or 2 depending on the condition of the floor, then proceed with HYPERSHINE SOFT 3.
  • Working with a little water at an average speed of 200 rpm for about 60 sec / mq.
  • Polish with HYPERSHINE SOFT 4, work with little water, increasing the speed of the mono-brush to 400 rpm.

Maintenance: polish the floor with HYPERSHINE SOFT 4 dry system from 1000rpm high-speed polishing machine. Alternatively, use a floor machine with adjustable speed at 400 rpm.

Ceramics, Klinker and glazed tiles

Hypershine 11

Deep cleaning (do not use on polished tiles).

Deep cleaning in only 2 STEPS

  • Start by washing the floor with HYPERSHINE SOFT 2. Use a low speed single brush machine of 160 rpm. Use a small amount of water and work until stains and dirt disappear.
  • Proceed with HYPERSHINE SOFT 4. Work with little water at low speed.

HOW TO USE

barra gialla

Aged wood

Hypershine 12

Floor restoration with variable speed single disc machine.

Restore in only 3 STEPS

  • It is recommended to use a variable speed single disc machine.
  • Start by washing the floor with HYPERSHINE SOFT 1 or 2 depending on the condition of the floor, then proceed with HYPERSHINE SOFT 3 and 4.
  • Dry at medium speed of 200 rpm until the old signs and imperfections disappear.
  • Polish at high speed with HYPERSHINE SOFT 4.
  • Maintenance: Polish at high speed with dry HYPERSHINE 4.

Epoxy resin

Hypershine 13

Floor restoration.

Restore and polish in just 4 STEPS

  • It is recommended to use a variable speed single disc machine.
  • Start by washing the floor with HYPERSHINE SOFT 0 or 1 depending on the condition of the floor. Then proceed with HYPERSHINE SOFT 2 and 3.
  • We recommend to work with little water at a speed of 200 rpm for about 60 sec / mq.
  • Polish with HYPERSHINE SOFT 4, work with little water, increasing speed up to 400 rpm.

Maintenance: polish the floor with HYPERSHINE SOFT 4 dry with a high speed single disc machine.

Edges, corners and risers

Hypershine 14

Polishing with hand grinding machine or floor sander.

Finishing and polishing in just 4 STEPS

Thanks to the high elasticity and durability, HYPERSHINE SOFT can be adapted to any angle grinder or stair polisher.

  • Start sanding with HYPERSHINE SOFT 0 or 1 depending on the condition of the surface.
  • Proceed with HYPERSHINE SOFT 2 and 3.
  • Polish with HYPERSHINE SOFT 4. Polish with a little water or dry.

PRODUCT OVERVIEW

barra gialla
Hypershine 17

HYPERSHINE 000 - grit 60

Among the HYPERSHINE family is the most aggressive. Removes important scratches. Excessive wear and stains.

Hypershine 16

HYPERSHINE 00 - grit 120

Prepare the floor for further renovation with the HYPERSHINE method.

Hypershine 15

HYPERSHINE 0 - grit 220

Prepare the floor for further renovation with the HYPERSHINE method.

Hypershine 17

HYPERSHINE 1 - grit 400

For background cleaning. Quickly removes scratches and stains from the surface leaving it opaque, clean and ready for the next steps.

Hypershine 16

HYPERSHINE 2 - grit 800

It removes small scratches, leaves an opaque and well-prepared surface for the final steps of the HYPERSHINE method.

Hypershine 17

HYPERSHINE 3 - grit 1500

This pads leaves the surface ready for the polishing phase with the HYPERSHINE method.

Hypershine 16

HYPERSHINE 4 - grit 3000

Final phase for the HYPERSHINE standard method. Leaves the polished surface renewed. Also used for the daily maintenance of floors. Used regularly keeps the floor clean and shiny.

Hypershine 15

HYPERSHINE 5 - grit 5000

Adds a further degree of gloss and finish after HYPERSHINE 4.

Hypershine 17

HYPERSHINE 6 - grit 10000

Adds a further degree of gloss and finish after HYPERSHINE 5.

HYPERSHINE pads are easy to identify thanks to NUMBER printed on the back.

Hypershine 18
HYPErshine ideal da usare EN

Browse the PDF catalog online

HG Hyper Grinder