PROVA SUL CANTIERE

    BOOK A DEMO

    Mail:
    Company:
    Nation:
    City:
    Contact's Phone:

    Show Languages
    ItalianoIngleseTedescoSpagnoloFranceseGrecoRomania
    Via Chieti 6
    65121 Pescara IT
    [email protected]
    [email protected]

    BUSH HAMMER

    The new BUSH HAMMER series by HG Hyper Grinder is made up of the best range of tools for nicking, bushammering and sandblasting finish on concrete, agglomerates, stone and industrial floors. It is suitable also to remove resins and glues.

    FINISH

    BUSH HAMMER EFFECT

    It makes anti-slip marble, granite and natural stones surfaces. It removes glues, paints and epoxy resin. It shatters thick resins hardly removable with other type of tools. It creates the “exposed face effect” on precast panels. It bush hammers all type of surfaces. Prepares the surface for resin application.

    Bush hammer used in combination with diamond tools, leale the surface perfectly smoothened and to the desired conditions of roughness according to the next required treatment.

    BUSH HAMMER Ø 240MM

    BUSH HAMMER
    Ø 240MM

    ø 240mm bush hammer disc
    equipped with 4 coarse-grain rollers.

    CODE TYPE SIZE
    BH240MMG Bush Hammer 4 coarse-grain rollers ø 240mm
    RLBHGR Coarse-grain replacement roller ø 48mm

    BUSH HAMMER
    Ø 240MM

    ø 240mm bush hammer disc
    equipped with 4 standard-grain rollers.

    CODE TYPE SIZE
    BH240MMS Bush Hammer 4 standard-grain rollers ø 240mm
    RLBHST Standard-grain replacement roller ø 45mm

    BUSH HAMMER
    Ø 240MM

    ø 240mm bush hammer disc
    equipped with 4 fine-grain rollers.

    CODE TYPE SIZE
    BH240MMF Bush Hammer 4 fine-grain rollers ø 240mm
    RLBHFN Fine-grain replacement roller ø 45mm

    BUSH HAMMER Ø 200MM

    BUSH HAMMER
    Ø 200MM

    ø 200mm bush hammer disc
    equipped with 3 coarse-grain rollers.

    CODE TYPE SIZE
    BH200MMG Bush Hammer 3 coarse-grain rollers ø 200mm
    RLBHGR Coarse-grain replacement roller ø 48mm

    BUSH HAMMER
    Ø 200MM

    ø 200mm bush hammer disc
    equipped with 3 standard-grain rollers.

    CODE TYPE SIZE
    BH200MMS Bush Hammer 3 standard-grain rollers ø 200mm
    RLBHST Standard-grain replacement roller ø 45mm

    BUSH HAMMER
    Ø 200MM

    ø 200mm bush hammer disc
    equipped with 3 fine-grain rollers.

    CODE TYPE SIZE
    BH200MMF Bush Hammer 3 fine-grain rollers ø 200mm
    RLBHFN Fine-grain replacement roller ø 48mm

    TECHNOLOGY

    • It is the tool for rough finishes and for remove and level floors.
    • It can be used with water or dry.
    • The position of the rollers allow to have uniform finishes with a single passage.
    • The position of the rollers allow to have uniform finishes with a single passage.

    APPLICATION

    Thanks to the quick attack, all Bush Hammers can be fixed immediately to the pad holder of the floor grinding machine.

    PERFORMANCE

    I Bush Hammer HG allow to realize rough finishes, to remove and level floors.
    • It is possible to work with water or dry.
    • The position of the rollers allow to have uniform finishes with a single passage.
    • Easy installation and use.
    • Uniform finishes over the whole surface.
    • Uniform finishes also close to the edges with a single passage.