To fill the porosity and surface cracks in the floors. Easy and quick to use as it is applied together with the grinder equipped with HCR2 diamond disks. CONCRETE FILLER mixes with the dust of the grinding, conforming to the original colour of the floor. Compatible with CONCRETE COLOR DYE concrete dyes. Concentrated product. Dilute to 10%.
Concrete Hardener H10
Consolidating agent for surfaces in concrete, terrazzo, sifted grit and concrete agglomerates. Reacts with concrete salts, greatly increasing hardness, strength and seals deeply preventing the penetration of oil, grease and other chemical agents. It stops the release of dust.
Concrete Guard Lithium
Oleo-repellent product. The application creates a very hard film that guarantees maximum protection. It can be applied directly or polished with high-speed brushes. The obtained gloss is easily reproducible with high speed machines that quickly eliminate scratch- es and streaks formed over time. Recommended in airports, shopping centers and in large areas with high traffic. PRODUCT READY TO USE.
CONCRETE GROUT AND CRACK REPAIR
Effective trhee-component product to repair concrete floors, close large holes and deep cracks. The system consists of three products: CONCRETE GROUT CATALYZER, CONCRETE GROUT RESIN and CONCRETE GROUT GLASS BUBBLES with “micro-spheres”. The micro-spheres keep the product soft and malleable so as to allow it to perfectly fill the area to be cured. The expansive resin allowing subsequent grinding and polishing.
Concrete Color Dye
Concentrated pigment powder for colouring concrete surfaces. Wide range of shades available. It is diluted in liquid to be diluted in about 4 liters of Acetone to be then sprayed on the surface. Attention: The colours of CONCRETE COLOR are indicative. They are not considered RAL as they are not a paint, but the result of a chemical reaction in the concrete. Therefore the shade can change according to the type of concrete. We always recommend to perform a preliminary test to ascertain the colour obtained.
Stone Sealer And Soap
Water-repellent and brightening detergent. Clean, polish and protect the surfaces. Excellent for ordinary maintenance of marble floors and polished terrace. Ideal for washing the surface after treatment with Polish. It makes the water-repellent surface.
Concrete Epo Grout
Exceptional product to close the porosity of the surfaces in concrete, terrazzo, sown and concrete agglomerates. Three-component product.
SOLIDIFIES CONCRETE MUDS AND NATURAL STONE. Special powder that quickly solidifies sludge and slurry giving it a consistency similar to GEL, facilitating its collection and disposal. NOT DANGEROUS. Application: • Smoothing and polishing of concrete • Cutting saw and drilling of concrete and stone • Areas of concrete to be rinsed (concrete mixers) • Stone restoration.
Water repellent nanotechnology formulation for concrete surfaces, mortars, bricks and natural or artificial stones. Base of water. It is sufficient to apply the product on existing surfaces to create an invisible and water-repellent protection that protects against stains, humidity, superficial cracks and mold.