HYPERSHINE SOFT

Available in all sizes and
grit from 60 to 10.000.

The same routine operations but with better results.

Using HYPERSHINE pads is easy. Use them with all type of floor cleaning machines. Only need little water to achieve a perfect surface.

• They are suitable for all types of machines and are available in different sizes.
  
• Replaces chemicals and normal abrasive pads.
  
• Effective and fast even on the most resistant dirt and difficult surfaces.

The work both wet or dry. Environmentally friendly system.

The respect of the environment is for everyone benefit. HYPERSHINE gives the best result without any chemicals.

• Sustainable.
  
• No chemicals.
  
• No wax or polish.
  

Faster, easier and cheaper.

HYPERSHINE pads clean any floor in any condition. Save on chemical products achieving a hight gloss surface in a fast and easy way.

• Cost effective.
  
• Hypershine have long life.
  
• No need far chemicals.
  
• Time and cost reductions.
  

Surprising results, superior brilliance every day.

With Hypershine you can turn an old floor into a new floor! Thanks to the diamond micro-particles the results are incredible! Removing scratches, cleaning and hight glossy polishing will be a breeze.

• High brightness.
  
• Maximum cleaning.
  
• Scratches removal.
  
• Easier and cheap maintenance.
  

Polishing with HYPERSHINE and single disc machine.

• Start sanding with HYPERSHINE SOFT 1 or 2 depending on the condition of the floor, then proceed with HYPERSHINE SOFT 3.
• We recommend that you work with little amount of water for about 60sec / sqm.
• Polish with HYPERSHINE SOFT 4 using water.

Floor restoration with high speed single disc machine.

• We recommend a high-speed machine.
• Start by washing the floor with HYPERSHINE SOFT 1 or 2 depending on the condition of the floor, then proceed with HYPERSHINE SOFT 3.
• Working with a little water at an average speed of 200 rpm for about 60 sec / mq.
• Polish with HYPERSHINE SOFT 4, work with little water, increasing the speed of the mono-brush to 400 rpm.

Maintenance: polish the floor with HYPERSHINE SOFT 4 dry system from 1000rpm high-speed polishing machine. Alternatively, use a floor machine with adjustable speed at 400 rpm.

Floor restoration with variable speed single disc machine.

• It is recommended to use a variable speed single disc machine.
• Start by washing the floor with HYPERSHINE SOFT 1 or 2 depending on the condition of the floor, then proceed with HYPERSHINE SOFT 3 and 4.
• Dry at medium speed of 200 rpm until the old signs and imperfections disappear.
• Polish at high speed with HYPERSHINE SOFT 4.
• Maintenance: Polish at high speed with dry HYPERSHINE 4.

Floor restoration.

• It is recommended to use a variable speed single disc machine.
• Start by washing the floor with HYPERSHINE SOFT 0 or 1 depending on the condition of the floor. Then proceed with HYPERSHINE SOFT 2 and 3.
• We recommend to work with little water at a speed of 200 rpm for about 60 sec / mq.
• Polish with HYPERSHINE SOFT 4, work with little water, increasing speed up to 400 rpm.

Maintenance: polish the floor with HYPERSHINE SOFT 4 dry with a high speed single disc machine.

Polishing with hand grinding machine or floor sander.

Thanks to the high elasticity and durability, HYPERSHINE SOFT can be adapted to any angle grinder or stair polisher.

• Start sanding with HYPERSHINE SOFT 0 or 1 depending on the condition of the surface.
• Proceed with HYPERSHINE SOFT 2 and 3.
• Polish with HYPERSHINE SOFT 4. Polish with a little water or dry.

Among the HYPERSHINE family is the most aggressive. Removes important scratches. Excessive wear and stains.

Prepare the floor for further renovation with the HYPERSHINE method.

Prepare the floor for further renovation with the HYPERSHINE method.

For background cleaning. Quickly removes scratches and stains from the surface leaving it opaque, clean and ready for the next steps.

It removes small scratches, leaves an opaque and well-prepared surface for the final steps of the HYPERSHINE method.

This pads leaves the surface ready for the polishing phase with the HYPERSHINE method.

Final phase for the HYPERSHINE standard method. Leaves the polished surface renewed. Also used for the daily maintenance of floors. Used regularly keeps the floor clean and shiny.

Adds a further degree of gloss and finish after HYPERSHINE 4.

Adds a further degree of gloss and finish after HYPERSHINE 5.